• High-end digital front panel, direct programming step 100KHz.
• Soft-start from RF output 0 state.
• Adjustable power output from 0 to 30 W with automatic power control to maintain a fixed level of any output.
• The SCA can be used BNC input connectors, input the standard RDS or SCA additional signals.
• Provides a conservative high reliability rating components.
• Easy to rationalize the layout of the circuit and parts replacement.
• Special MOS tube radio with NXP BLF245.
• Built-in stereo encoder.
• Full protection of the reflected power and overheating problems.
• Integrated LCD monitor all system parameters.

Frequency :87-108MHz, can be customized according to user 70 ~ 110MHz.
Frequency Step value: 100KHz 10KHz, or customized according to 50KHz.
Modulation: FM, the peak deviation ± 75KHz
Frequency stability: <± 100Hz
Frequency stabilization mode: PLL Frequency Synthesizer PLL
RF output power: 0 ~ 30 watts ± 0.5dB
Harmonic: <-65dBc
RF output impedance: 50Ω
RF Output Connector: N Type Female
Audio Input Connector: BNC, RCA
SCA and RDS input connectors: BNC female
Pre-emphasis: 50us, 75us (user selectable)
S / N ratio of mono:> 70 dB (20 to 20KHz)
S / N ratio stereo:> 65 dB (20 to 15KHz)
Stereo Separation:-50dB
Audio Frequency Response: 80 ~ 15000Hz
Audio Distortion: <0.5%
Modulation: 15%
Input Level:-15dBV
Main Power Requirements: 220V or 110V
Operating temperature range: -10 to 45 ℃
Work: continuous work
Size: 483 x 88x 320 mm, 19-inch standard rack 1U.
Reference range: 4Km-6Km  

Weight: 9kg